Replacing Double Glazed Window Handle
Replacing a double glazed window handle is not difficult as long as you follow the right steps. You first need to identify the type of handle you want to replace and take a measurement of the spindle.
Cockspur handles can be found on older uPVC window frames, but they have an atypical height in comparison to aluminum counterparts (also called spade handles). This means they require a spindle that is longer.
Take a look at the Spindle
When replacing a handle in
double glazing window handle-glazed windows, it is crucial to measure the spindle to ensure that you receive the right
replacement window handle. The length of the spindle is determined by how far the handle extends out of the base plate, or how far it goes into the lock, it may differ between handles. It is important to not remove the old handle when measuring the spindle. You might not be in a position to get a precise reading in the event that you do.
In general, you can expect that the new handle will come with a spinning part. The size of the spindle will differ between manufacturers and handles therefore it is important to verify before purchasing. It is recommended to purchase the handle and spindle together to cut down on time and effort.
Espag handles are the most commonly used type of uPVC window frames. They use a concealed locking mechanism that allows you to shut and open the windows. They come in a range of styles and colors to suit your home. When choosing an Espag handle for your home, pay attention to the spindle's dimensions as it will affect the security of windows.
These handles can be cranked to the left or right, based on your preferences and they are also available in a range of sizes to fit a large variety of frames. These handles are a simple and efficient option for your double-glazed window.
Another popular type of handle is the tilt and turn window handle. These handles are usually big and sturdy, since they lock in two locations when opening windows. They are available in a variety of finishes, including chrome, stainless steel brass, white uPVC that can be matched to your ironmongery.
The cockspur handle is a more traditional window handle with an elongated spur which pushes against the wedge of the frame. They are a straightforward and efficient choice for your double glazed window, and are available in a wide variety of nib and nose sizes to accommodate a broad variety of profiles.
Take the handle off
There are various handles available for uPVC double glazed windows. The most popular type is Espag handles, which have spindles that run through them and engages with the locking mechanism of the frame of the window. Other handles include tilt-and-turn ones that allow you to tilt the window to let in air or turn it completely open. These handles are usually bulkier and have more complicated mechanisms. However, they also provide greater security. Certain styles of handles can be used with a key lock which adds additional security to your home.
Before replacing windows handles, it is important to assess the condition of the handle. This will help you determine whether a new handle is needed or if the existing handle needs to be adjusted or replaced. If the handle is damaged, it will have to be replaced.
If the handle is loose, then it might require tightening or retightened. Utilizing a screwdriver to locate the screws within the handle and take them out. Be careful not to use a power tool because it could cause damage to the window frame, or the handle. Once the screws have been removed, they can be placed in a secure location.
After the handle is removed from the window frame you can remove it and replace it with a new handle. Begin by putting the new handle so that the holes on the window frame line up with the holes on the base of the handle. Once you're satisfied with the alignment, put into the new handle.
After you are done testing your newly-installed window handle by opening and closing the window several times to ensure that it functions as intended. The screw should be tightened in the event of any wobbling or looseness. This could cause the handle to become unstable and even be able to fall off.
We have a variety of
replacement window handles in a range of colours such as black, white and brass. We carry espag inline, cranked, inline and tilt and turn handles for all kinds of uPVC, timber and aluminium windows. We also have slimline handles that can be tailored to meet your requirements. This is ideal if you are concerned about space.
Remove the Screws
The screws on a window handle are usually hidden by plastic screw covers, which you will need to remove prior to installing the new handles. You can remove them with a screwdriver, or even your fingernail. They are usually found between the handle and its substructure when it is in its open position. Be sure to not lose any of the screws while removing them. If possible keep the caps in case they are needed later on during the installation process.
Depending on what you need depending on your needs, there are a range of choices for the type of handle you replace. If you're looking for something that's more elegant than the standard handles, slimline models might be the best for you. They are designed to fit the same size spindle as standard handles, however they are more compact and won't interfere with shutters or blinds. You can also select from brass, stainless steel, and chrome to match the ironmongery in your home.
Once you've removed the old handle, it's time to make your replacement. You will need to identify the type of handle you have, and then measure the length of the spindle, prior to selecting the replacement. You'll need the new handle to be the correct size for your uPVC window and the screw holes must match the holes on your current one.
When you're ready to install the new handle, you'll need ensure that it's in the open position and that the spindle is correctly in its proper position. Then, line up the holes that fix the handle with the hole in the window, and insert the screws or pins. Be careful not to
tighten window handle too much them, as this could cause the window frame to crack.
After the new handle is installed, you'll need to test it by turning it to lock and unlock the window. It is recommended to do this several times to make sure the window lock functions and to see if there are any problems. If you are satisfied with the performance of your new window handle you can replace the screw caps and put the cover back on.
Install the new handle
uPVC window handles are able to last for many years. However, they can be damaged and require replacement. If the handle is loose due to loose screws or pins or has broken off entirely from the base of the window, it is crucial to determine the source of the damage prior to deciding on the best plan of action.
In the majority of instances the window handle that is loose must be tightened before it can be repaired. This will require taking off the handle to find the screws that secure it. These screws are typically hidden inside the handle. However, they can easily be found with a screwdriver. Once they have been removed, the handle can be removed from the spindle.
After you have removed the handle, you can
replace window handle it with the new one. This is a simple process, but it does require care to ensure that the screws are securely in place. The handle needs to be positioned correctly and then locked in place.
Based on the kind of window you have, there are different types of handles that are available. Cockspur handles are available, as are tilt and turn handles and Espag locks. Each of these have their own specific features, so it is important to ensure that you're using the correct handle for your window.