How to Replace the Replacement Key Battery For the
saab key programmer 9-3
Saab owners have a unique set of steps to add another key. It requires dealer service using a handheld computer dubbed Tech-2. Then the transponder is replaced and a key are required to be purchased.
Rotate your keys to prevent one from deteriorating faster than the other. This will keep your keys in perfect condition.
Replacement Case
As opposed to the traditional
saab 9-3 key programming 9-3 key replacement (
https://qualified-reindeer-flvx0f.mystrikingly.com/blog/16-facebook-pages-you-must-follow-for-saab-93-key-fob-marketers) keys of old, the new keys have electronic components which makes it hard to duplicate. This has made theft of cars a lot more difficult than it was just a few years ago. However, it has also made the replacement of lost keys a much more expensive endeavor.
Saab 9-3 owners must have two working keys. If one is lost, it costs a lot of money to add another to the car since it requires replacing the CIM module and re-programming the locking cylinders. Dealers will typically charge $100-$200 for this.
There are ways to reduce these expensive. Some parts suppliers will use the code of the spare key to cut a new metal blade for less than the cost of the dealer. The key must, however, be the same as the original in order to function within your car.
You can also change the case yourself by following these steps. You'll require an open-faced screwdriver and a lot of patience. Utilizing the screwdriver, slowly pull the plastic apart and separate the emergency key from the case. After the case is open take out all electronic components and place them into your new case. Make sure you insert the correct key and badge into the case.
Replacement Battery
The replacement battery for the
saab 9-3 replacement key 9-3 is an affordable part that can be replaced easily and quickly. This YouTube DIY video user Cyclone Cyd explains how to replace the battery of the remote key fob in only four steps. This tutorial should work for any modern saab key fob though the process may vary slightly.
The first step is to find the button that lets off the backup key in the fob. This button is usually on the back of your fob, close to the Saab Logo. Next you will need the flathead screwdriver to insert into the tiny hole in this button. This should be enough to open the case to allow you to change the battery.
After the new battery CR1632 is installed, you can reassemble the remote key fob, and then program it to your car. The procedure should take no more than an hour or less. It's a very easy process that does not require any special tools.
If you lose a key the process will be slightly more complicated but it is still able to be done. The dealer needs to first determine the VIN of the vehicle and order an additional TWICE module and key blade with the correct unique code. The dealer will then need to program the key using MDI, a new software tool.
Replacement Key Fob
The key fob is the part that locks and unlocks your car. It has an internal battery. Batteries have a finite lifespan and will eventually fail. This is a problem that occurs with all cars. The good news is that you can change the batteries in most key fobs, and not have to replace the entire case. Amazon sells replacement fobs that have all the electronics in place. You can simply open the case and replace the batteries. You will need to remove the emergency key before you can replace the batteries. To do this, insert the screwdriver of a small flat head into the slot in the middle of the. The case will split once you move the screwdriver around it.
If you're ready to change your keys, be sure to have a spare available. This can save you a lot of money. If you have a spare, you can ask the dealer cut an entirely new key and then program it to the car, which is much cheaper than replacing the entire key fob.
If you do not have a spare key you can add an additional key to your car, but it requires a lot of research and effort. A second key can cost around a hundred dollars and also requires programming of the car's computer. Professionals can accomplish this however it's a costly option.
Replacement Ignition
As opposed to the earlier Saab automobiles, the current SAAB 9-3 models are equipped with an upgraded alarm system that is built around a coded key. This means that should you lose only one working key, adding an additional one could be extremely costly since the car needs to have a computer module fitted and must also be programmed to accept a new key. Dealers can charge hundreds of dollars to program an additional key when they are not able to complete the task.
Dealers will charge you a high price to replace your car computer (also called the CIM or SAAB twice) when you lose your only working key. Instead, we can reprogram the EEPROM on your existing car computer, preparing it for a replacement key, which will save you more than 50% of what you'd spend at a dealer.
If you've been a long time owner of a 03-11 SAAB 9-3, then you likely realize that the ignition key isn't very robust. They can become extremely sticky, and the buttons are known to fall off of them every now and then, so you should consider buying a new one if the one you have isn't working properly. Luckily, replacing the ignition key isn't as complicated as it seems, and it can be done in a short time using the proper tools.