Repairs to uPVC Windows
uPVC is an excellent option for modern homes. They are durable, long-lasting and easy to maintain. In contrast to aluminium and timber, they are not susceptible to get rusty or decay.
Regularly cleaning and lubricating UPVC windows and doors is vital. This will reduce unnecessary repair costs and improve the efficiency of energy.
1. Broken Glass
The damaged glass in your windows could cause serious damage to your home and may even be fatal. It is essential to take the time to make sure that you're doing all you can to keep your windows in good shape.
For single pane windows, it can be relatively simple to replace windows, and the new one will generally fit within the frame of the previous one easily. If you have double-paned windows that are joined by internal beading, it is difficult to remove and replace the panes that were previously in use. In this case it is essential to purchase plastic spacers to help the new pane fit into the window frame.
If you are going attempt to remove the window panes yourself it is important to wear the proper safety gear, including thick gloves and eye protection. It is also recommended to lay down a drop cloth before you start working on the glass, so that any shards will fall onto the fabric instead of landing on the floor, where they could be trampled on and cause further damage.
It's a good idea to tape the gap once the glass has been removed. This will prevent drafts and water from getting into your home until a professional arrives to repair the window. This also serves as a barrier to prevent any intruders from getting into your home. If the distance between the window and the door is substantial, you may prefer an alarm system that includes a window. This will provide the best of both.
2. Sagging
uPVC is a durable, energy-efficient and affordable alternative to timber sash
window repair. As time passes, they may develop a variety of issues such as sagging. A window that is sagging can cause problems with light, draughts or even security. It's crucial to act immediately if you notice your uPVC windows are falling down.
To repair a window that is sagging, you can try repositioning the hinges. You'll first need to open the windows so you can get at the frame. After that, using a screwdriver, you can remove the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've repositioned the hinges, close your window and check for fitting. If you're satisfied with the fit, tighten the screws until they stay in position.
If you are unable to reposition the hinges, you may need to replace the seal. Over time rubber seals can lose their elasticity and become dry, which causes them to loosen. It is crucial to replace your seal as soon as you can in order to ensure that your
upvc window repairs window watertight and draughtproof.
uPVC handles may also loosen up. This is usually due to screws that have become undone over time, but it could be due to the handle mechanism wears out. Luckily, it's not difficult to fix the handle of a window that is loose yourself. First, you'll need to shut the window and then perform an initial fitting. The joint at the corner of the sash should be aligned with the joint on the casing. If it isn't then you can use a screwdriver to loosen the handle and turn the mechanism back into position.
3. Water Leaks
If you're waking up to wet floors and damp walls each time it rains it's important to take action. The leaks of water from windows do are not just a cause for degrading of the structure of your home but also undermine your efforts to regulate the temperature within your home. The most common reason for leaks in uPVC windows is that the sealant around the frame is damaged or missing.
This is a fairly simple fix that can be done by any DIY expert. Depending on how serious the problem is, the old caulking may have to be removed. It is crucial to keep in mind that when it is about
upvc window repairs,
Source Webpage,, do not be tempted to apply too much caulk in order to make the area harder to clean and reduce your energy efficiency.
It is important to check that any drainage holes are free of debris and that the sill pan is placed correctly so that it drains away from the window. In more severe cases, you may need to replace the window.
Mold spots and rotted sills are another sign of water leakage. This fungus thrives under conditions of dampness and can spread quickly throughout the house.
If the leakage is occurring between the double-glazed glass, it is more likely that the problem is related to the seal, not the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.
4. Faulty Hinges
Hinges may be to blame if your uPVC window is difficult to open or it opens in the breeze. They can be easily replaced by any competent DIYer and are usually completed in just a few minutes.
Like all mechanical parts hinges are prone to be damaged over time. It's very simple to change the hinges on a window but it's much easier if someone else helps you to hold the frame.
It is also important to verify that the uPVC hinges are being opened and closed in the correct direction. Check for the arrows on each hinge to determine which direction the
window repair near me should be opened.
The issue could be caused by opening the window improperly or by a poor installation at the factory. Sending us a photo through our website can often solve the issue. We are happy to provide assistance.
It is also essential to ensure that the hinges are lubricated on a regular basis. This can be accomplished by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can make the window easier to open and close. It also helps prevent corrosion and decrease the chance of sticking. This must be done at a minimum every year. WD40 and other solvent-based fluids are not recommended since they will damage parts of your uPVC window.
5. Draughts
Draughts in Upvc windows can be caused by a few different factors. First, the hinges because of wear and tear, may become displaced, which causes a gap to form where the sash joins the frame. This can be easily repaired by giving them a good clean, but in the event that they are beyond repair it may be necessary to get them re-aligned or replaced. The interlock, which is on the hinge side of the window, can also become misaligned, again it is feasible to give them a thorough clean, however in certain cases, it may be necessary to have them replaced.
These seals can wear down or get damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of
upvc window repairs with low-emissivity lenses. This will help regulate indoor temperatures, and reduce draughts.
Another, and most effective ways to reduce the draughts in your home is to use an draught excluder. These are typically fabric tubes filled with some type of filler. They can be placed on top of your windowsill. These will keep your home warm by blocking cold air.
With a bit of regular maintenance and repairs your windows made of upvc will continue to provide a great level of insulation and security for your home. It is essential to remember that all windows eventually become worn out, and it is cheaper to replace them instead of fixing them. So, if you're experiencing problems with your upvc windows, it's recommended to seek assistance from a professional as soon as possible.
